Description

Theses bunded stores are manufactured from 3mm steel plate and have RHS cross members, pressed ribs and a heavy duty RHS end frame with 2mm corrugated panels.

Available in 4 sizes:

Type 2858w: To hold 8 x 205L drums vertically
Type 2859w: To hold 16 x 205L drums vertically
Type 2860w: To hold 32 x 205L drums vertically

NOTE: The “floor” area above the sumps (Type 2859w & 2860w only) is covered with galvanised steel channel sections so that loose drums or pallets can be stored directly on to it, while the upper shelf is an open, box section construction designed to support pallets

Type 2862w: 12 x 205L drums horizontally. The front of the store is open for ease of access and safety ‘stop rails’ at the back prevent drums from being pushed through.

With galvanised support channels and fully seam welded sumps the stores are fitted with plinths to eliminate contact with the ground and is shot blasted before being painted.

The sumps fully comply with all the UK regulations relating to sump capacities